Filter
Top Products
- 11 -REAR
PANEL CONNECTIONS
entertainment system.
CONNECTING TO REAR SPEAKER TERMINALS
Connect after turning the power of the TV OFF.
• Press the Right Speaker red button and insert the positive lead wire + into the hole
above the button. When the button is released, the wire is locked into place. In the
same manner, press the Right Speaker black button and insert the negative lead wire -.
Repeat this procedure for the Left Speaker.
CAUTION: Do not connect Speakers simultaneously to the REAR SPEAKER terminal of
the Projection TV and Amplifier. This could damage both the Projection TV and the
Speakers.
Your Hitachi TV was designed to use 8 speakers only. Any other type may degrade the
audio performance of your entertainment system.
TIPS ON REAR PANEL CONNECTIONS
• The S-Video connection is provided for high performance laser discs, VCRs, etc., that
have this feature. Use this connection in place of the standard video connection if your
device has this feature.
• If your device has only one audio output, connect it to the left audio jack on the TV.
• Refer to the operating guide of your other electronic equipment for additional
information on connecting your hook-up cables.