Filter
Top Products
- 29 --
SOUND- FUNCTIONS
Press MENU, 3, ENTER, 2, ENTER to display the SOUND SETTING.
Use the CURSOR , to select a function.
Press ENTER to set a function or to turn it on or off.
• MTS MODE (Multi-Channel Television Sound)
will allow you to select STEREO (a stereo broadcast), SA (second audio) program
which may be a secondary language, weather report, etc. or MONO (monaural sound)
used when receiving a weak stereo broadcast.
The sources received will be displayed below the channel number. The source you
select will be displayed to the left of the channel number. See example below for each
selection when both stereo and second audio are received (monaural is always
received).
• DYNAMIC BASS
This function allows you to enjoy spectacular bass sound that would normally be heard
only with expensive home speaker systems.
• LOUDNESS
This function will improve the quality of both low and high frequency sounds when
listening at low volume levels.
• INT. SPEAKERS
This function is useful when first setting up the external speakers, or if you prefer to use
only speakers from a separate stereo system.
• SURROUND
The following surround sound settings will reproduce the "live" sound you would hear in
concert halls, sports stadiums, movie theaters, etc. when you set up your speaker
system as shown at the beginning of the audio section on page 32. The connections are
also shown in the section on rear panel connections on page 10. The surround sound
system is most effective with movies and other stereo material that is Dolby Surround
encoded, and played on a Hi-Fi stereo VCR.