Filter
Top Products
- 32 -USING
THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS
6. Release both buttons when the VTR starts to change channels. The Genius Remote
will now control your VTR.
CLU-850GR Illustration
NOTES:
1. If your VTR cannot be operated after performing the above procedures, this means that
your VTR's codes have not been precoded into the GENIUS REMOTE. Please store your
VTR codes in memory by using the USER mode. (Refer to page 41.)
2. The GENIUS REMOTE CONTROL will remember the codes you have programmed in
until the batteries are removed from the GENIUS REMOTE CONTROL. After replacing the
batteries REPEAT the entire programming procedure stated above.
3. If you have a play back only VTR (no CH UP/DOWN function), please follow operating
step 5 described above and then check a VTR function until you find the button that will
allow the precoded VTR buttons to operate your VTR.
PRECODED VTR BUTTONS
These buttons always transmit the chosen precoded VTR codes.
SELECT BUTTON
This is for setting up the Genius Remote to transmit the VTR's remote codes.
EXCLUSIVE TV BUTTONS
These buttons are for operating the TV.
USING THE GENIUS REMOTE TO CONTROL CABLE BOX FUNCTIONS
• Operating the pre-coded function for your Cable Box
This Genius Remote is designed to operate different types of cable boxes. You must
first program the Genius Remote to match the remote system in your cable box. (Refer
to Table on page 40).
1. Set the MULTI-PAGE select switch to "CATV".
2. Set the USE/LEARN mode select switch to "USE."
3. Turn ON your cable box.
4. Aim the Genius Remote control at the front of your cable box.
5. While holding down the SELECT button, press the button that matches our cable box
as shown on page 40. Continue to hold down both buttons. The channels of the cable
box will begin changing when the correct button is pressed. When this occurs, the
Genius Remote Control is programmed for your cable box. If the cable box channels do
not change after 5 seconds, try a different Genius Remote button.
6. Release both buttons when the cable box starts to change channels. The Genius
Remote will now control your cable box.