Hitachi 60SX3B Projection Television User Manual


 
- 9 -FRONT
PANEL JACKS AND CONNECTIONS
 AVX (Audio/Video) selector
Press this button to select the current antenna source, video:1, 2, or 3. Your selection is
shown in the top right corner of the screen.
VOLUME level
Press these buttons for your desired sound level. The volume level will be displayed on
the TV screen.
 CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV
screen.
 POWER button
Press this button to turn the TV on or off.
 POWER light
You will see a red light when the TV is turned on.
NOTE: Your HITACHI TV will appear to be turned "off" if there is no video input when
VIDEO:1 or 2 is selected using the AVX button. Check the Power On indicator to make
sure the TV is off when not in use.
 AI (Artificial Intelligence) sensor
This "Artificial Intelligence" sensor will make automatic picture adjustments depending
on the amount of light in the room to give the best picture. See page 30.
 REMOTE CONTROL sensor
Point your Genius Remote at this area when selecting channels, adjusting volume, etc.
 V-SYNC (Vertical Hold) knob
If the TV picture "rolls" up or down, adjust the knob until you get a good picture. This
control seldom needs adjustment.
 FRONT INPUT JACKS (for VIDEO:3)
Use these audio/video jacks for a "quick" hook-up from a camcorder or VCR to instantly
view your favorite show or new recording. (Press the AVX button until VIDEO:3 appears
in the top right corner of the TV screen.)
FRONT PANEL JACKS AND CONNECTIONS
• The front panel jacks are provided as a convenience to allow you to easily connect a
camcorder or VCR as shown in the following examples.