Hitachi AP 720STM Cable Box User Manual


 
12
(Maintenance, cont.)
[Summary]
Figure 19 provides the Prime, Rinse and Clock functions.
[Operation Key]
(Figure 19)
Prime: To Figure 20 Prime Operation screen
Rinse: To Figure 22 Rinse Operation screen
Clock: To Figure 26 Time Setup screen
Back: To Figure 5 Main Menu screen
(Figure 20)
Prior to Prime Operation, the Operator needs to set the Wash Buffer tube into
the Wash Buffer Bottle, the water tube into the Deionized Water Bottle, &
empty the Waste Bottle. “Ok” key will start priming operation.
Ok: To Figure 21 Priming Operation screen
Back: To Figure 19 Maintenance screen
(Figure 22)
Prior to Rinse Operation, the Operator needs to set the Wash Buffer tube and
water tube into Deionized Water Bottle. “Ok” key will start rinsing operation.
Ok: To Figure 23 Rinse Operation screen
Back: To Figure 19 Maintenance screen
(Figure 24)
Prior to Drain Operation, the Operator needs to pull out the tubes from Wash
Buffer Bottle and Deionized Water Bottle. “Ok” key will start draining
operation.
Ok: To Figure 25 Drain Operation screen
End: To Figure 19 Maintenance screen
(Figure 26)
Internal clock of the machine can be set in this screen.
Year: Figure 2 numerical value input screen with title [#Years]
Month: Figure 2 numerical value input screen with title [#Months]
Day: Figure 2 numerical value input screen with title [#Days]
Hour: Figure 2 numerical value input screen with title [#Hours]
Minute: Figure 2 numerical value input screen with title [#Minutes]
Second: Figure 2 numerical value input screen with title [#Seconds]
Set: Clock is set, return to Figure 19 Maintenance screen
Back: Clock is not set, return to Figure 19 Maintenance screen