Filter
Top Products
17
2 Screen Display and Operation Method
2-10 Alarm
[Summary]
The alarm screen will appear when a problem occurs during the Auto-Run. The
alarm will sound and can be stopped by pressing the “Alarm Off” key.
There are two kinds of alarm screens. The first alarm screen is for confirmation.
The Operator will confirm the failure or error displayed on the screen. Press “Ok”
key to proceed to the next process. The second alarm screen requires action. The
Operator needs to make a proper correction according to the screen display, and
then make the selection to “Retry” or “End” the process.
Figure 36 Alarm screen of power interruption (confirmation)
Figure 37 Alarm screen of data initialization (confirmation)
Figure 38 Alarm screen of no Sample/Reagent Rack (selection)
Figure 39 Alarm screen of no pettes (selection)
Figure 40 Alarm screen of wrong pette setup (selection)
Figure 41 Alarm screen of wrong start pette setup (selection)
Figure 36 - Alarm Screen of Power Interruption (Confirmation)
[Screen Display]
(Figure 36)
[Summary]
If there is a power failure during the Auto-Run, the control software will detect the
power interruption after the power has returned and Figure 36 will appear. The
elapsed time from the start of power interruption will be displayed. Press ‘Ok’
key to continue the process.