Filter
Top Products
STOP
PLAY
123
456
789
0 +10
SURROUND
SPEED
AUDIO
DISC NAVIGATION
DISPLAY
SKIP CH
SKIP CH
SLOW
VCR TV
OPEN CLOSE
EJECT
PAUSE STEP
REC OTR
MENU
DVD
VCR
POWER/STANDBY
LINE2
VIDEO IN L (mono) AUDIO IN R
REW F. F W D
STOP/EJECT
PLAY
REC/OTR
REC TIMER
PROGRESSIVE SCAN
DIGITAL AUTO TRACKING
DVD/VCR Combo DV-PF3
STOP PLAY
OPEN/CLOSE
CHANNEL
VCR
OUTPUT
DVD
MP3 PLAYBACK DVD / DVD-R / CD / CD-R / CD-RW COMPATIBLE
VCR Functions
–
13
–
EN
English
2
2
INDEX SEARCH
0 3
STOP
VCR Functions
PLAY
Hint
Hint
• When a tape without record tab is inserted, the VCR/DVD will start playback automatically.
•
Tracking will be automatically adjusted upon playback.To adjust the tracking manually, press
SKIP/CH
(i/K or j/L)
.
Playback
Before:
Turn on the TV and set it to
channel 3.
•
If channel 3 is already occupied for broadcasting,
see “RF Output Channel” section on page 7.
2
2
1
1
3
3
4
4
1
1
2
2
3
3
4
4
3
3
press first.
VCR
To cue or review picture during playback (Picture Search)
Press g or h.
• Press it again and the VCR/DVD will search in
super high speed. (in the LP/SLP mode only)
To freeze the picture on TV screen during playback (Still mode)
Press PAUSE/STEP F. Each time you press the
button, the picture will be forwarded by one frame.
• If the picture begins to vibrate vertically during the
still mode, stabilize the picture by pressing
SKIP/CH
(i/K or j/L)
.
• If the picture is distorted or rolling vertically, adjust
the vertical hold control on your TV, if equipped.
Counter Reset
Press CLEAR/C.RESET.
To play back in slow motion
Press SLOW during playback or the still mode.
• If the noise bars appear on the TV screen, you can
reduce it by pressing SKIP/CH
(i/K or j/L)
.
Auto Rewind
When a tape reaches its end during playback, fast-
forward, or recording (except timer recording and
One Touch Recording), the tape will automatically
rewind to the beginning. After rewinding finishes, the
VCR/DVD will eject the tape.
Other Operations
Hint
Hint
•
Still/Slow/Pause
mode will be auto-
matically cancelled
after 5 minutes to
prevent damage to
the tape and the
video head.
• To return to play-
back from the
Picture
Search/Still/
Slow mode, press
PLAY
BB
.
You can specify the number of pro-
grams to be skipped.
• Insert a tape into this unit.
press first.
VCR
TIME SEARCH
– :– –
SEARCH MODE
1
1
-MENU-
TIMER PROGRAMMING
B AUTO REPEAT [OFF]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
MENU
2
2
-MENU-
TIMER PROGRAMMING
B AUTO REPEAT [ON]
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
Hint
Hint
• To cancel Auto Repeat, follow steps
[1]-[2] above. Then, press
Cursor B, so that [OFF] appears
beside AUTO REPEAT. Press
CLEAR/C.RESET to exit.
• If menu remains on the TV screen at
step [3], press
CLEAR/C.RESET to
exit.
You can repeat playback of a
whole tape automatically.
• Insert a tape into this unit.
press first.
VCR
Time Search Index Search Auto Repeat
x2 (Twice) x1 (Once)
INDEX SEARCH
– –
3
3
AUTO REPEAT B
Hint
Hint
• These functions are not available dur-
ing recording.
• Press
STOP C to stop the search.
• If the end of the tape is reached dur-
ing a search, this unit will cancel the
search and rewind the tape.
Index Search:
• This unit stores index mark at the
beginning of the recording. There
should be time gap between two
index marks for the Index Search.
You can specify the time for fast
forwarding or rewinding.
• Insert a tape into this unit.
press first.
VCR
To stop playback
4
4
1
1
01 ~ 20
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
Beginning
of tape
End
of tape
CURRENT PROGRAM
INDEX MARK
TIME SEARCH
2 : 5 0
3
3
To rewind To fast forward
4
4
After searching ...
PLAY B
0:01 ~ 9:59
(1 minute~9 hours and 59 minutes)
1
1
3
3
To rewind To fast forward
4
4
After searching ...
PLAY B
*
Refer to page 11 to switch between the VCR/DVD modes.
or
SEARCH MODE
or
or
1
1
2
2
Select the desired length of time
for fast forwarding or rewinding
H9850UD_EN/SP.qx3 05.4.8 11:42 AM Page 13