17
ENGLISH
CONNECTION (continued)
Connecting Procedure (continued)
PC connection
For best results the PC graphics card should be set to 1360 x 768@60Hz. Before connecting your PC please ensure
that it is set to this resolution (or one of the other acceptable resolutions listed below) or you may not be able to see a
picture.
VGA lead
(not supplied)
Use a PC-VGA lead (not supplied) to connect your
PC to this unit. Plug the lead carefully not to break or
bend the contact inside of plug.
Select PC input
Switch on this unit.
Select the PC input mode
19
.
NOTE
If there is no video signal from the computer when the unit
is in PC mode, “NO SIGNAL” will appear on the TV screen
for approx. 10 seconds.
See
27
for the PC Monitor Menu.
•
•
Audio lead
(not supplied)
PC
TV (Rear bottom view)
to PC/HDMI-1
AUDIO input
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x400 70Hz
VGA 640x480 60/75Hz
WVGA 848x480 60Hz
SVGA 800x600 60/75Hz
Connecting an HDMI or a DVI device to the HDMI input
The HDMI input receives digital audio and uncompressed video from an HDMI equipped device or uncompressed
digital video from a DVI equipped device. When you connect to a DVI device with a HDMI-to-DVI adapter lead, it only
transfers the video signal, so it is necessary to use separate analogue leads (RCA/Phono type) to transfer the audio
signals. Select the HDMI1 or HDMI2 input mode
19
.
See “HDMI1” or “HDMI2” in Audio menu on
24
for the selecting the HDMI audio input source.
or
DVI device
HDMI device
To DVI
output
Audio lead (not supplied)
HDMI - to - DVI adapter lead
(HDMI type A connector)
(not supplied)
HDMI cable (type A connector)
(not supplied)
To HDMI output
TV (Rear
bottom view)
to HDMI-2
AUDIO input
Details of HDMI input signals
HDMI compliant (type A connector), HDCP compliant
Suggested scan rates: PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
HDMI Audio: 2-channel PCM,32/44.1/48kHz
sampling frequency16/20/24
bits per sample
MODE Resolution Refresh rate
XGA 1024x768 60/75Hz
WXGA 1280x720 60Hz
WXGA 1280x768 60Hz
WXGA 1360x768 60Hz
(according to Graphic card)
NOTE
As well as HDMI-2, you can also use HDMI-1 IN to
connect to DVI equipped device - in this case, you must
connect the audio leads to the PC/HDMI-1 AUDIO IN
sockets.
Some devices may not operate properly with the TV.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
This set is classed as “HD-Ready”. This
means that it is capable of displaying HD
(High Definition) signals when connected
to a suitable HD source, such as an HD receiver or
DVD player that has HD capability, via HDMI, DVI, or
Component Video connections.
•
•
Downloaded From TV-Manual.com Manuals