Filter
Top Products
26
VERTICAL POSITION *
1
–10~+10 When the ZOOM mode is selected as the picture format, you can
adjust the vertical picture position.
Press ϶ then press ϳ or ϴ to adjust the vertical position of the
picture by up to +10 and downwards by up to -10.
AV2 OUTPUT *
2
TV AV2 will output the channel position that the internal tuner is set to.
MONITOR AV2 will output the picture currently displayed on the TV screen.
AV2 INPUT
AV Composite signal (e.g. from VHS-Video recorder).
S-VIDEO S-Video signal (e.g. from DVD player with S-Video output).
AV COLOUR *
3
AUTO The AV Colour setting only applies when viewing devices connected
to the AV inputs.
PAL
SECAM
NTSC4.43
NTSC3.58
PAL60
AUTO 4:3 DEFAULT *
4
4:3 This option selects the default way that a 4:3 signal is shown - either
as normal “4:3” or expanded in the “PANORAMIC” mode.
PANORAMIC
SIDE PANEL COLOUR
GRAY You can change the color of side bars showing up in 4:3 mode. It is
recommended to set GRAY to reduce image retention.
BLACK
SCREEN SAVER
ON This is one of the initiatives to reduce image retention by moving the
displaying screen slightly at interval.
OFF
INVERSION
The picture is displayed alternately between positive image and
negative image to reduce the risk of phosphor burn-in of the screen.
This function is effective for a still pattern image.
SCREEN WIPE
Press ϶. MENU disappears and the picture showing on the screen
will be replaced with a white screen. The screen will return to normal
when any button is pressed.
RESET TV SETTING Reset all adjustment items to the factory preset values.
TV SETUP OPERATION (continued)
NOTE
*
1
You cannot move the picture vertically in any of the other picture format.
*
2
This determines whether the AV2 outputs the signal from the internal tuner or whatever input is shown on the screen.
Please note that AV1 is fixed to the internal tuner. So, you cannot select the output-signal. AV1 always outputs the signal from the
internal tuner.
*
3
PAL is the colour system used in UK, Germany, etc. NTSC 3.58 is used in the USA. PAL 60 is used in the UK by some video
recorders, when playing an NTSC recording on a PAL system TV set.
Different DVD players produce different types of output signal according to the exact model, such as PAL, SECAM, NTSC 4.43,
NTSC 3.58 and PAL 60.
However the best type of signal to use is RGB, so ideally you should select this type of output signal in the DVD player’s menu
system, and connect the DVD player to the TV with a SCART lead.
*
4
AUTO 4:3 DEFAULT is available only for AUTO picture size setting.
*
4
In HDMI or COMPONENT mode, AUTO 4:3 DEFAULT is available only for 480i/576i mode.
Setup menu (continued)
Audio
Setup
VERTICAL POSITION
AV2 OUTPUT TV
AV2 INPUT AV
AV COLOUR AUTO
AUTO 4:3 DEFAULT PANORAMIC
:RETURN
MENU
: ADJUST:SELECT
Video
Downloaded From TV-Manual.com Manuals