Hitachi P42A01 TV Antenna User Manual


 
25
ENGLISH
TV SETUP OPERATION (continued)
Setup menu
Selected Items Setup hint
AUTO TUNING
If you need to restart the automatic tuning
process, use the following procedure.
Select AUTO TUNING, then press ϶.
Press ϳ or ϴ to select your country, then press ENTER.
Press ϳ or ϴ to select the colour system.
Press ENTER.
The automatic tuning process will now begin. This may take a few
minutes. So, please be patient.
When the programme on the screen stops changing and the
sound comes on, the search process is complete.
MANUAL TUNING
Usually the Auto Tuning stores all available
stations in the reception area. If some stations
have poor reception, they may not be stored
- however, you can store these manually if you
wish.
Example: Preset BBC 2 in program position 2.
Select MANUAL TUNING, then press ϶.
Press ϵ or ϶ to select PAL or SECAM-L. Then press ENTER.
Press ϶. The auto search begins. It will stop at each station that
has a good enough reception. Press ϶ again until you receive a
clear BBC2 picture.
The auto search should find the best reception automatically,
so fine tuning is not normally necessary. However if you want to
you can fine tune the reception manually. - When the search has
stopped at a station, press ϳ or ϴ until the desired fine tuning is
achieved.
If you want to stop the search manually, press ϵ or ϶.
Then press ENTER.
The channel position number will be highlighted. Press ϳ or ϴ
repeatedly until the number changes to 2. Then press ENTER.
BBC 2 is now stored as channel position 2.
Repeat steps and to preset other TV stations.
CH ALLOCATION
The Automatic station presetting stores the
stations found in a specific order. This will
normally be the correct order (e.g. BBC1 on
channel 1 etc.), however if it is necessary the
order can be changed. And also the channel
name can be changed if it is necessary.
Channel rename procedure
Select CH ALLOCATION, then press ϶.
Press ϳ
or ϴ to select channel that you want to rename, then
press ϶.
Press ϳ or ϴ to select character, then press ϶. The cursor will
move to the next position. Press ϵ to return to the previous cursor
position.
Press ENTER to set the channel name.
Channel sorting procedure
Press ϳ or ϴ to select the channel that you want to move, then
press ENTER.
Press ϳ or ϴ to select the position that you want to move the
channel to, then press ENTER.
TELETEXT LANGUAGE WEST for Western Europe
EAST for Eastern Europe
LANGUAGE This TV has 15 different languages for menu set up which can be
selected through the On-screen Display.
SLEEP TIMER OFF You can set “SLEEP TIMER” to automatically turn off the TV set.
30
60
90
120
Audio
Setup
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TELETEXT LANGUAGE WEST
LANGUAGE English
SLEEP TIMER
: EXIT
MENU
: ADJUST: SELECT
Video
Downloaded From TV-Manual.com Manuals