Filter
Top Products
11
First time use
RF IN
RF OUT
COMPONENT OUT
INPUT OUTPUT
OUTPUT
RLVIDEO R L VIDEO
OUTPUT
RF IN
DTV Receiver with Component video
Stereo VCR
Pr Pb Y
RLVIDEO R L VIDEO
Connecting a DTV receiver/set-top box
with component video and a VCR
This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV and TV programs.
Your TV has component video inputs. Connecting your TV to a
DTV receiver with component video can greatly enhance picture
quality and realism.
From DTV
Antenna
From Antenna
Note:
You can connect the component video
cables to either set of Component 1 or
Component 2 jacks on the TV .
The Component 1 or Component 2 jacks
and HDMI-1 and HDMI-2 jacks can be used
with Progressive (480p, 720p) and
Interlaced (480i, 1080i) scan systems.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to VIDEO-1 (or VIDEO-2) at the same time
or the picture performance will be
unacceptable.
For an HDMI connection, see page 13.
TV back panel
Rear Panel Connections
3X80801A_En_p10-17 7/12/06, 10:42 AM11