Filter
Top Products
18
The Remote Control
The Remote Control
To control a VCR:
Program the remote control to recognize the brand of
your VCR (See “Operating the pre-coded function” on
page 20). The buttons shown at right will then control
the VCR.
Press VCR first.
Using the remote control to operate your other devices
Note:
The TV remote control may not operate your VCR, DVD player, or cable TV converter. Refer to the owner's manual
supplied with your other devices to see which features may be available. Additionally, the remote control for this TV
may not support certain features available on the original remote controls for your other devices, in which case it is
suggested that you use the original remote control for the applicable device.
In addition to operating the TV, the remote control can operate most cable TV converters, satellite receivers, VCRs,
and DVD players, regardless of their brand. The remote control is pre-programmed to operate most HITACHI
satellite receivers, VCRs, and DVD players. To control a non-HITACHI device (or a HITACHI device that the remote
control is not pre-programmed to operate), you must first program the remote control. See “Operating the pre-coded
function” on page 20.
To control a DVD player:
Program the remote control to recognize the brand of
your DVD player (See “Operating the pre-coded
function” on page 20). The buttons shown at right will
then control the DVD player.
Press DVD first.
2
1
3
3
2
3
2
2
2
1
3
3
3
3
3
2
2
1 DVD button
This button allows the remote to control your DVD
player by setting it to DVD mode.
2 PRECODED DVD Buttons
These buttons transmit the chosen precoded DVD
codes.
3 EXCLUSIVE TV Buttons
These buttons are for operating the TV.
1 VCR button
This button allows the remote to control your VCR
player by setting it to VCR mode.
2 PRECODED VCR Buttons
These buttons transmit the chosen precoded VCR
codes.
3 EXCLUSIVE TV Buttons
These buttons are for operating the TV.
3X80801A_En_p18-25 7/11/06, 8:07 PM18