13
Item
no.
Function Switch Operating procedure
6
AUTO WHITE
AUTO WHITE
・Pickup a white scene and press the
AUTO WHITE for automatic white balance
adjustment.
・At white balance, the AUTO WHITE
LED flashes for several seconds and
the buzzer sounds.
7
AUTO BLACK
AUTO BLACK
・Press the AUTO BLACK to cut off the light and
automatically adjust the black balance.
・At black balance, the AUTO BLACK
LED flashes for several seconds and
the buzzer sounds.
8 Curtail auto
BREAK OFF
・Press the BREAK OFF during auto setup to
setup
break off the auto setup process.
9
CAM NO.
CAM NO. ・Camera number is shown.
・Start the camera menu to set the camera
number.
10
Scene file
- SCENE FILE - ・There are 9 scene files to 0-8 including 0 file.
selection
1
・Press scene file to access a scene file.
2
The LED lights.
3
・Press the switch while the LED is lit.
4
The LED extinguishes when the scene file
5-8
is deselected.
・ When the all LED light turns off , scene file 0
is chosen.
・ To select scene files 5 – 8 ,
set switches 5-8 to on, then press
switches 1 – 4
SCENE PRESET
・Press the SCENE PRESET until blink stops, pre-set data
is loaded.
Press the SCENE PRESET again until blink stop
the scene file data is loaded again.