Filter
Top Products
16
Item
no.
Function Switch Operating procedure
１６
Manual adjustment
・Select adjustment items with the manual
control section switches. The display
section shows the adjustment item and
value.
・Use the rotary encoder to adjust the items
for optimum values.
* Adjustment
CTL VALUE
・When the CTL VALUE switch is on, the
value display
adjustment value is displayed from -100 to
+100.
【Display example】
1
Detail Adjustment
【Display】
(1)DTL LEVEL
DTL 1
TOTL: Total detail level adjustment
H: H detail level adjustment
V: V detail level adjustment
(2)LEVEL DEP /
DTL 2
・Press again the switch for the following
BOOST FREQ
display.
LDPP: Dark component noise due to detail
reduced
FREQ: Adjusts detail boost frequency (13 M to 19
M).
(3)CRISP /
DTL 3
・Press Again the switch for the following
DTL SOURCE
display.
H-CR: Noise component reduction due to H.
detail.
V-CR: Noise component reduction due to V. detail.
SRC: Detail signal source (R,RG,RGB) selection.
LEVEL-DEP / FREQ
LDPP FREQ
GAIN
-20 0 +10
DETAIL LEVEL
TOTL H V
CRISP / SOURCE
H-CR V-CR SRC