Filter
Top Products
15
Item
no.
Function Switch Operating procedure
１４ ND/CC filter
＜ ND ＞
・ND/CC selects ND filters or CC(ECC)
selection
filters. Each filters status are shown by
＜ CC ＞
the upper section ND/CC LEDs of these
switches.
LEDs and filters relationship are as
HEAD
shown below.
5600
ND CC(ECC)
CAP:CAP A:3200
1:100% B:4300
2:CROSS C:5600
3:6.25% D:6300
4:1.6% E:8000
・When the HEAD switch is set to on, the
ND/CC filter control priority shifts to the
camera head. Again press the HEAD
switch to return control priority to the RCU.
・Press the 5600 for electrical 5600 K filter
status.
(*) When the MENU switch is on (menu mode),
the ND/CC filter cannot be changed.
１５
Monitor select
R G B
・Selects analog pix monitor display signal.
ENC
SUP
・Selects analog WFM monitor display signal.
SEQ
SUP / SEQ : Display superimposes 3
RGB waveforms.
・SDI WFM monitor display signal
SUP : superimposes mode.
SEQ : sequence mode.
When both the SUP and the SEQ are off,
signal display is the same as pix monitor.