Filter
Top Products
14
Item
no.
Function Switch Operating procedure
１１
Scene file
- SCENE FILE - ・Scene file adjustment values can be stored
memory
1
in memory by the following procedure.
2
(1) Press the MEMORY switch.
3
(2) The MEMORY LED begins flashing.
4
(3) Press the scene file ( 1 – 4 or
5-8
5-8 ) for storing data in the memory.
MEMORY
(4) The selected scene file LED flashes and
the MEMORY LED lights for about 3 seconds.
This completes storing memory.
(*1) The adjustment data of paint gain and
black can not be stored in memory,
(*2) To stop memory operation,
while the MEMORY LED is flashing,
press again the MEMORY switch.
１２
Shutter control
-SHUTTER-
・Press SEL to toggle the shutter display
ON/OFF
on/off and select the shutter speed and
SEL
mode.
Insequence,1/100(*1),1/250,1/500,1/1000,
1/2000 seconds, variable, AES,CCFR
CCFR(*2)→100(*1) → 250 → 500 → 1000
↑
AES(*3) 59 2000
Variable mode
1/59 to 1/1983 (1080i/60)
1/50 to 1/2008 (1080i/50)
(*1) 1/60 ,when 1080i/50 CCD is used.
(*2) CCFR: cc frame mode
(*3) AES:auto electric shutter mode
・For variable mode, after selecting the
manual control section SHUTTER switch,
１３ Master gain -MASTER GAIN-
・Master gain can be selected in 3 dB steps.
selection
＜ ＞
(-3dB~24dB)
・Selected master gain position is indicated
by the LED on left of this switch.