Filter
Top Products
DELAYED RECORDING - 59 -
12 Press the PROGRAM button to set the program in memory.
Note: If program is overlap, the VCR gives you an error message that disappears from the screen in about 5
seconds.
13 Press the POWER button to turn off the VCR. The delayed recording indicator will display on the VCR.
The delayed recording indicator will display on the TV.
This tells you that the VCR will automatically record at the times and dates you have programmed.
Note: If a cassette has not been inserted or a cassette without safety tab has been inserted, the delayed
recording indicator will flash to warn you. The cassette without safety tab will be ejected automatically. Be sure to
insert a cassette with safety tab intact.
The VCR will automatically give a warning display on the screen 5 minutes before timer recording is to start .
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (with the safety tab still attached) to record on.
• If you have installed a cable box (see page 23), turn on the cable box and select the channel you want