Filter
Top Products
PROBLEM GUIDE / MAINTENANCE - 80 -
Guide indications in VCR display and OSD screen
The following indications appear in the VCR display and OSD screen to tell you the current status of your VCR.
ODS Indication When it appears Meaning and
troubleshooting
(flashes for about 5
seconds)
When programming the
timer
• The VCR clock has been
set to "--:--". Set the time
and program the timer.
(flashes for about 5
seconds)
When programming the
timer (by using VCR
display)
• A non-existing PlusCode
number has been entered.
Check the PlusCode
number of the program
and enter it again.
(flashes for about 5
seconds)
When programming the
timer
• Eight programs have
already been stored.
Cancel unnecessary
program and transfer the
new program.
(flashes uninterruptedly)
When you turn power off
after programming the
timer, or transfer the
programming with the
power off
• A cassette has not been
inserted or a cassette
without safety tab has
been inserted. A cassette
without safety tab will be
ejected automatically.
Insert a cassette with
safety tab intact..
Display for about 5 sec.
(flashes for about 3
seconds)
When you press the play,
record, fast forward, rewind
or super index button
• A cassette has not been
inserted. Insert a cassette.
Display for about 5 sec.
(flashes for about 3
seconds)
When you press the
record button for
recording or dubbing, or
press the
(VIEW/SKIP/BLAN
K) button for BLANK
SEARCH
• A cassette without safety
tab has been inserted. It
will be ejected
automatically. Insert a
cassette with safety tab
intact..
(flashes for about 3
seconds)
When you turn power on
• The video heads are
dirty. Cleaning them is
recommended. To switch
off the CL display, clean
the heads, turn the power
off and press the channel
button. The CL display
automaticall
y
switches off