Filter
Top Products
INTEGRATING YOUR STEREO SYSTEM WITH YOUR VCR - 75 -
• Make sure the VCR is connected to your stereo system, as shown above.
• Make sure that "STEREO" audio is selected from the VCR Set-Up Menu, as shown on page 38, of
"RECORDING OPERATIONS" section, "Stereo vs. mono sound".
• Select VCR recording speed (SP or EP) as shown on page 33, of "RECORDING OPERATIONS"
section, "Basic recording steps".
1 Press the AVX button on remote control, so that L1 (line) on the TV display.
2 Turn on the stereo, and start the selection you wish to record.
3 Press the REC/IRT button on VCR or REC button on the remote control to start recording.
4 Press the STOP button to stop recording.