Filter
Top Products
19
4 Make sure that item 1 is highlighted "CLOCK SET <AUTO>".
• If "CLOCK SET <MANUAL>" is highlighted, press the (1) button to switch it to "CLOCK SET <AUTO>".
5 Press the (2) button.
This screen appears to show that the clock is being set.
• It may take about five minutes.
• Since the VCR is searching for a broadcast station that transmits a time signal, the channel indication on the
cable box changes automatically.
When the clock is set, the screen changes to a TV picture and the correct time appears in the VCR's display.
Notes:
• If the clock is not set after five minutes have elapsed, set the clock manually (see page 20).
• If the displayed time drifts from the current time by more than one hour, select your correct time zone and set the
DST (see page 19).
SETTING THE CLOCK -TIME ZONE SETTING/DAYLIGHT SAVING TIME SETTING
What to do if the displayed time drifts from the current time by more
than an hour
Note: Turn on the cable box with hookups [E], [F] or [G] before setting.
1 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.