Filter
Top Products
23
Notes:
• The clock uses the 12-hour system. You set it for AM or PM.
• An illogical time (like 13 for the hour or 20 for the month) will not be accepted.
• If you press the wrong digit, exit the screen by pressing GUIDE and recall the screen to enter the correct setup.
PRE-TUNING THE VCR TUNER
Note: An antenna or cable must be connected to the VCR before you begin this operation.
Presetting the received channels without using a cable box
(Hookups [A], [B], [C] or [D])
1 Press the POWER button to turn on the VCR.
2 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
3 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
Remote Control Illustration.
4 Press the (4) button to select the CHANNEL PRESET operation.