Filter
Top Products
62
To record from stereo
BEFORE YOU BEGIN...
Remote Control Illustration.
• Make sure the VCR is connected to your stereo system, as shown above.
• Make sure that "STEREO" audio is selected from the VCR Set-Up Menu, as shown on page 42, of
"RECORDING OPERATIONS" section, "Stereo vs. mono sound".
• Select VCR recording speed (SP or EP) as shown on page 39, of "RECORDING OPERATIONS" section,
"Basic recording steps".
1 Press the AVX button on remote control, so that L1 (line) on the display.
2 Turn on the stereo, amd start the selection you wish to record.
3 Press the REC/IRT button on VCR or REC button on the remote control to start recording.
4 Press the STOP button to stop recording.
COPYING TAPES FROM A CAMCORDER
Hook-up
You may use your VCR to copy tapes from any camcorder onto standard VHS cassette