Filter
Top Products
50
Note: If a cassette has not been inserted or a cassette without safety tab has been inserted, the delayed
recording indictor will flash to warn you. The cassette without safety tab will be ejected automatically. Be sure to
insert a cassette with safety tab intact.
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (with the safety tab still attached) to record on.
• If you have installed a cable box (see page 26), set it up before starting recording.
If you are using a cable box the VCR can control;
Turn on the cable box
If you are using a cable box the VCR cannot control:
Turn on the cable box and select the channel you want to record on the cable box (08 in this case).
Note: You can correct any item entered as you go by pressing the CLEAR button repeatedly until the digit to be
corrected changes to white dash "-" on the screen. Then enter the correct number. Illogical times and dates won't
be accepted.
To stop recording while in the timed recording mode:
1 Press POWER button.
2 Press the STOP button within 10 seconds.
• This can be done either on the VCR or with the remote control.
Remote Control Illustration.
Important: Your timed recording settings take effect when you turn off the power on the VCR.
USING THE VCR PLUS+ SYSTEM FOR RECORDING
• About the VCR Plus+ system
This handy feature makes timed recording a snap. You don't need to enter the specific channel, date, time or
duration of a program. All you enter is its PlusCode programming number - a number of up to eight digits. This
special code is easy to find in your favorite TV program guide or daily newspaper. Here's a sample page from TV
Guide showing PlusCode numbers next to each program.