Filter
Top Products
43
Recording will start and the REC indictor on the VCR will appear.
Notes:
• Recording will not start unless the cassette has the safety tab in place. When a cassette without a safety tab is
inserted, "TAb" will flash in the VCR display for several seconds and the cassette will be ejected
automatically.
• Press the PAUSE button to set the VCR to the recording pause mode.
Press the button again to re-start recording.
• If you stay in PAUSE mode for more than 5 minutes, the VCR automatically switches to STOP mode to protect
the tape.
6 Press the STOP button to finish recording.
RECORDING A PROGRAM -RECORDING TIPS
To watch one program while recording another
1 Once you have set the VCR for recording, press the VCR/TV button.
The VCR indicator disappears. Now, you will be viewing through your TV only.
2 Switch channels using your TV controls or the VCR remote, if it's programmed to control your TV (see
page 54).
Remote Control Illustration.
Notes:
• You can check on the recording by pressing VCR/TV again. This will switch you back to viewing through the
VCR, and you'll see the program you are recording.
• If you're hooked up with an audio/video cable: Switch the TV from AUX or VIDEO mode back to the TV