Filter
Top Products
30
12 Cable box channel changed to channel 9: Press the (1) button to end this setting.
Remote Control Illustration
Your cable box and VCR are now set for VCR Plus+ program recording. Depending on the manufacturer and
model of the cable box, you may also be able to use the VCR remote control to:
• Change channels on the cable box with the remote's channel up/down buttons.
• Use the numbers on the VCR remote to select cable box channels directly.
Note: Only the cable box will change channels. The VCR channel will not change.
Cable box did not tune to channel 9: Press the (2) button to return to step (10), and enter a different code
number.
If the codes you entered do not work:
• Try repositioning the cable box on top of the VCR and reentering the codes.
• Try reentering all code numbers (00-61). Press the number button to enter another code number.
If none of the codes work, press the GUIDE button to quit. The VCR will not control your cable box. However,
the output channel of the cable box has been set. Turn on the cable box and leave it tuned to the channel you
want to record before the recording is scheduled to begin.
Note: If you make a mistake when entering digits, press the CLEAR button repeatedly to return the white dash "-"
to the digit to be corrected. Then, punch in the correct number.
PLAYBACK
• To playback a recorded tape
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Insert a recorded tape.