Filter
Top Products
CABLE BOX SETUP
The following setup allows the VCR channel to automatically switch to the cable box output channel during
delayed recording.
Note: This setup should be performed if you receive all channels through a cable box.
(Hookups [E], [F], or [G]).
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
3 Press the
cursor button to select the SETUP option and then press the ENTER button.
4 Press the
cursor button to select the CHANNEL and then press the ENTER button.
5 Press the
cursor button to select CATV2, and then press the GUIDE button to end this setting.
6 Press the GUIDE button. The main on-screen menu will appear on the TV screen.
7 Press the
cursor button to select SETUP option, and then press the ENTER.