Filter
Top Products
you want to record on the cable box before recording starts.
Important: Your timed recording settings take effect when you turn off the power on the VCR.
Caution of VCR Plus+ Recording
After entering a PlusCode number, check the information displayed with the "PROGRAM REVIEW". If there is
(are) any unnecessary program (s), please cancel or correct it (them). Please refer to page 49, "Reviewing what
you have programmed".
Using the VCR Plus+ system to record a program (by using VCR's
display)
You can use the VCR Plus+ system to program the timer, observing the VCR's display, without turning on the
power to the VCR and TV.
Notes:
• If you use the VCR Plus+ system to program the timer while observing the VCR's display, you can only program
a one-time recording.
• To stop programming, press the POWER button to turn the VCR power on.
1 Insert a blank or erasable tape.
The power comes on automatically and the tape indicator lights on the display.
• When a cassette without its safety tab is inserted, playback starts automatically and VCR Plus+ recording
won't operate.
2 Press the POWER button to turn off the VCR.
3 Press the PROGRAM button.
The clock display switches to the indication shown on the right.
• If eight programs have already been stored in memory, "FULL" will flash in the VCR's display for about five
seconds.
4 Press the number buttons to enter the PlusCode number of the program you want to record.
Note: This number can be up to eight digits. If you enter a wrong digit, press the CLEAR button and enter the
correct one.