Filter
Top Products
• If you have installed a cable box (see page 23), the cable box output channel will appear in the CH
column.
9 Press the
cursor button to select the channel, and then press the or cursor button to change
the channel.
• If you want to record from an external equipment, press the
or cursor button to select L1
or L2 instead of the channel number.
10 Press the
cursor button to select the tape speed, and then press the or cursor or TAPE
SPEED button to change the recording speed to EP.
11 Press the
cursor to select the recording date, and then press the or cursor button to
change the date.
12 Press the PROGRAM button to set the program in memory.
Note: If program is overlap, the VCR gives you an error message that disappears from the screen in about 5
seconds.