Filter
Top Products
EASY DELAYED RECORDING WITH THE VCR PLUS+ SYSTEM
This setup should be performed if you are using an Antenna or Cable without a cable box. (Hookups [A],
[B], [C] or [D] .) If you receive all your channels through a cable box (Hookups [E], [F] or [G]) please refer
to page 23 "cable box setup" in "First Time Setup" section. The following operation is not necessary.
VCR Plus+ setup - Channel setup
The following shows the procedure you should perform when you are receiving the Cable News Network (channel
42 with the VCR Plus+ system) on channel 38.
Example
VCR Plus+
Channel Number
Channel Number
You Receive
42 38
Matching Broadcast CH Numbers to VCR Plus+ Channels
1 Turn on the TV and select the Video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen.
3 Press the
cursor button to select SETUP option, and then press ENTER button.
4 Press the
button to select VCR PLUS+ SETUP, and then press the ENTER button.
Note: If you have set up the cable box, the following operation is not necessary.
5 Press the cursor button to select "NO", and then press the ENTER button.
A small arrow points to a blank "- -" in the CHANNEL column.