Filter
Top Products
Honeywell 301C User Manual
Product and Sensor Types
This is a list of all the (preprogrammed) product types available from
the Identification option in the Tx Info menu.
Compatible products:
E3Point
420MDBS
ECFX
301R
301EM
SQN8X
XCD
XNX
IAQPoint2
Legacy Vulcain products
Note: When Group is selected as a product type, the remaining Tx
INFO screens are not accessible (because each product in the
group has already been individually programmed). Only the
Ident and Erase current Tx screens will be available.
The sensor type list applies to address ranges 1-96 and is not
dependent on the type of product selected. Devices in the address
range from 97-170 will display a BACNet object identifier, rather than a
sensor type.
*An additional Product Type, simply called “Group”, represents a group
created in the Groups Menu in the controller. When scrolling through
the available product type list, this name will appear as many times as
there are groups created in the controller (example: Group 1, Group 2,
Group 3, etc.). If a group is selected as the product type, then the
sensor type options are limited to MIN, MAX and MEAN.
1. Tx Info 121
-Ident-
E3Point
CO
25