![](http://pdfasset.owneriq.net/2/48/24836c66-5a65-4a70-bb3f-5d6a4d3e7ea5/24836c66-5a65-4a70-bb3f-5d6a4d3e7ea5-bg39.png)
Honeywell 301C User Manual
The fourth screen in the Config menu allows a definition of a day and a
week to be programmed.
Day and Week definition allows hours (time frames) to be defined for
either Daytime and Working Days respectively.
Note: Remember, the controller uses a 24 hour clock (0:00 to 23:59).
Any time changes (e.g., for Daylight Savings Time) must be
made manually or through BACNet time synchronization
(BACNet module required).
57