Filter
Top Products
Honeywell
137
alert you when alarms occur and end.
Tour
Display video in local monitor window by tour. If there are
record channels selected, only the record channels will be
displayed in the tour.
PTZ
Activation
Here you can set PTZ movement when alarm occurs. Such as
go to preset x when there is an alarm.
Copy
It is a menu shortcut button. You can copy current channel
setup to one or more (all) channels.
Save
You can click the save button after you complete setup for one
channel, or you can complete the whole setup and then click
the save button.
Refresh
Click this button to get the device’s latest configuration
information.
PTZ
PTZ interface is shown in Figure 6-41.
Please note that before operation, you have set the speed dome address,
and that you verify that the DVR and speed dome connection is stable.
Figure 6-41 The PTZ Setup Menu