Filter
Top Products
Honeywell
71
Advanced setup interface is shown in Figure 5-9. Draw a circle to enable
the corresponding function and then double-click the current item to go to
the setup interface.
Figure 5-9 Advanced Settings
IP Filter
IP filter interface is shown in Figure 5-10. You can add IP in the following
list. The list supports a max of 64 IP addresses.
Note that after you enable this function, only the IP listed below can access
current DVR.
If you disable this function, all IP addresses can access the current DVR.
Figure 5-10 IP Filter Menu
Multiple Cast
Here you can set a multiple cast group. Please refer to the following sheet
for detailed information.