Overview of Navigation and Controls
58
Figure 4-33 Function Menu
Note
•
Preset, tour and pattern all need the value to be the
control parameter. You can define it as you require.
• You need to refer to your speed dome user’s manual for
the auxiliary function definition. In some cases, it can be
used for special processes.
• The following setups are usually performed in the
interfaces shown in Figure 4-31, Figure 4-32 and Figure
4-33.
Preset Setup
In Figure 4-31, use eight direction arrows to adjust the camera to the proper
position.
In Figure 4-32, click Preset and input the preset number. Clicking Set will
save the preset.
Now you can add this preset to one tour.