Honeywell HRTL-One DVR User Manual


 
Rev 1.00 4 Document 900.0259
10/04
Installation
P
Installing the Hard Drive
Caution The HRTL-One must be powered off before installing a new hard disk drive
or removing an existing hard disk drive.
Do not remove the hard drive until after the HRTL-One has been powered
down for at least 60 seconds. This will protect the hard drive from possible
damage.
The hard drive must be installed before the HRTL-One can record video. For a list of
compatible hard drives, see Appendix B.
To install the hard drive:
1. Pull the active-handle outwards, then insert the miniature key (supplied in the hard
drive cartridge) into the key hole, turning the key counter-clockwise to the “power
off” (unlocked) position.
2. Pull the handle towards you to remove the carrier body away from the HRTL-One
chassis.
Key
HDD
HDD Full
ALARM TIMER PLAY
REC
MENU ENTER SEARCH SLOW
POWER
REC
PAUSE
/ Up
REW
Left
STOP
/ Down
FF
Right
Hard drive cartridge
Active-handle
Original HD Carrier
Active-handle
Keyhole
New HD Carrier
HRTL-One chassis
Cartridge frame
Carrier body
Original HD Carrier
New HD Carrier