Filter
Top Products
Rev 1.00 43 Document 900.0259
10/04
A
Solutions
This appendix describes some system malfunctions that may occur from time to time
and provides possible solutions.
If this happens … Try this …
The front panel POWER
LED is not lit.
• Check the power source cable connections.
• Confirm there is power at the outlet.
The HRTL-One does not
work when I press any
button.
• Check the Key Lock mode (press MENU and
ENTER at the same time).
The HRTL-One is not
recording video.
Check that the hard drive has been properly
installed.
For more information, see Installing the Hard Drive,
page 4.
You see the message
HDD Not Found. Please
Insert HDD and Press
Any Key
.
Check that the hard drive has been properly
installed.
The Record Enable is not
working.
Check that the Record Enable is set to Yes.
There is no live video. • Check the camera video cable and connections.
• Check the monitor video cable and
connections.
• Confirm that the camera has power.
• Check the camera lens setting.
The REC LED is on but the
HRTL-One is not recording.
When the HRTL-One is in Timer mode, it will only
record during the assigned times.
For more information, see Recording Timer Scheduled
Video, page 37.