Filter
Top Products
HRTL-One Digital Video Recorder User Guide
Rev 1.00 21 Document 900.0259
10/04
P
4. Press S or T to move to another field on the System screen or press Menu to exit
this screen and confirm the current operation.
5. If you have completed all your system configuration changes, press Menu again to
exit and close menu setup.
Message Latch Setup
This feature is used to select whether the
HDD Full
message will disappear after 10
seconds or remain on the screen.
No
is the default setting.
When you set up the message latch to be On (
Yes
), once the hard drive fills up, and
HDD
Overwrite
is not enabled, the message
HDD Full
will be displayed on the screen until
you disable the message latch.
When you set up the message latch to be Off (
No
), the
HDD Full
message will appear for
only 10 seconds.
Setting the Clock
You can set the system date and time and how the date displays on the Display Date
screen.
On-screen Display
1. On the System screen (Main Menu ➤ System), press S or T to select Date
Display, then press Enter.
2. Press S or T to choose a display format. Options are:
Y-M-D = Year - Month - Day
M-D-Y = Month - Day - Year
D-M-Y = Day-Month-Year
(System)
Buzzer: On
HDD Overwrite: No
Message Latch: No
Date Display: Y-M-D
Date: 2002-JUL-14(SUN)
Time: 22:38:29
New Password: xxxx
Clear HDD: No
System Reset: No
J