Filter
Top Products
11.SoftwareUpdate
In order to maintain proper performance of the product, it is essential to have the most up-to-date software. Visit the
Humax website to check the latest news and newly released software versions.
http://www.humaxdigital.com.
It is recommended that you periodically check for the availability of software update.
11.1 OTA (Over the Air)
OTA, an abbreviation of Over–the-Air, is a standard for the transmission of software through a broadcast system.
The manufacturers reserve the right to decide when and where an update is made available. The new software version
is then downloaded via cable. The software update via cable will only occur under the following circumstances.
**
1. The equipment should have appropriate loader software.
Caution: Please note that if normal loader software is not equipped, the product may not be updated or
operate properly after software update.
**
2. The manufacturer transmits the software via cable. The new version of the software is generally detected
automatically.
**
Caution:
• Please be careful to keep the power on and the power cord plugged in during software update. If the power is off
during software update, fatal damage may be caused to the product.
• Please be careful not to pull out the signal line (co-axial cable) during software update. Update may be interrupted
and the product may not operate.
**
Note:
• Other functions will not activate while software update takes place.
• It may take 5 ~10 minutes to update software.
• Scheduling operation cannot work during software update.
1. If new software is found when powering on
1. A message will be displayed to notify that new software is found.
2. Select Yes and press the OK button to update the software.
3. Starts downloading new software. Please wait until the update is completed.
4. When completing the software update, the equipment is automatically powered off and on again.
11. Software Update
GB 73