Filter
Top Products
To change the audio language in the current service, proceed as
follows:
1. Press the OPT
+
( ) button and select the Soundtrack item.
2. Press the button to activate the list of supported audio
languages.
3. Select the desired audio language in the list using the keys.
4. Select the audio mode (mono, stereo, Dolby) in the desired audio
language using the buttons.
5. Press the OK () button to confirm the change,
or the EXIT ( ) button to cancel the change.
The selected audio language is preserved regardless of the
change of service.
If the selected audio language is invalid from some reason, the
default audio language will be selected. (The default audio language
can be set on the Language Setting in the Main menu.)
If an audio language is encoded by Dolby Digital, the Dolby Digital
Symbol will appear in the list of audio languages.
NOTE:
The Dolby decoder with optical port shall be connected
externally to decode the Dolby Digital audio.
If there is a subtitle service available on the air, the subtitle icon ( )
will appear in the I-Plate.
To select the subtitle language, proceed as follows:
1. Press the OPT
+
( ) button and select the Subtitle item.
2. Press the button to activate the list of supported subtitle
languages.
3. Select the desired subtitle language in the list using the
keys.
4. Press the OK () button to confirm the change or press the
EXIT ( ) button to cancel the change.
Soundtrack
Subtitle
Function Guide
GB14