Filter
Top Products
To configure the TV screen mode, proceed as follows:
1. Activate the A/V Output Setting via the Main menu.
2. Select the Screen Mode item using the button.
3. Select the desired TV screen mode according to the connected
TV using the button. There are two modes: 16:9 and 4:3.
4. Press the OK ( ) or EXIT ( ) button to confirm.
To configure the display format on the TV, proceed as follows:
1. Activate the A/V Output Setting via the Main menu.
2. Select the Display Format item using the button.
3. Select the desired display format depending on the TV using
the button. There are two mode pairs depending on the type
of TV. If the TV supports only the 4:3 mode, there is one mode
pair such as Centre and Letter-Box mode. If the TV supports the
16:9 mode, there is another mode pair such as Full and
Pillar-box mode.
4. Press the OK ( ) or EXIT ( ) button to confirm.
The display format can be appropriately configured according to the
selected Screen Mode.
If the Screen Mode is selected as 4:3, there are two modes, Centre
and Letter-box in the display format. If the video is formatted as
16:9 and the display format selected as Centre mode, the right and
left portions of the video are cut off to fit the 16:9 video into the 4:3
TV screen. If the video is formatted as 16:9 and the display format
selected as Letter-box mode, the video is vertically shrunk to fully
display on the 4:3 TV screen. In that state, the top and bottom of
the TV screen are blacked out. If the video is formatted as 4:3, the
display format is not applicable when the screen mode is selected
as 4:3.
Display Format
Screen Mode
GB27