Filter
Top Products
Safety
GB2
This STB has been manufactured to satisfy international safety standards.
Please read the following safety precautions carefully.
MAINS SUPPLY : 90 - 250 V AC 50/60 Hz
OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result
in fire or electric shock.
LIQUIDS : The STB should not be exposed to dripping or splashing, and no objects
containing liquids, such as base, should be placed on the apparatus.
CLEANING : Disconnect the STB from the wall outlet before cleaning.
Use a light damp cloth (no solvents) to dust the STB.
VENTILATION : The slots on top of the STB must be left uncovered to allow proper airflow
to the unit.
Do not stand the STB on soft furnishings or carpets.
Do not expose the STB to direct sunlight, nor place it near a heater.
Do not stack electronic equipment on top of the STB.
ATTACHMENTS : Do not use any non-recommended attachments, as these maybe
hazardous or cause damage the STB.
CONNECTION TO THE SATELLITE DISH LNB
: Disconnect the STB from the mains before connecting or disconnecting the
cable from the satellite dish.
FAILURE TO DO SO CAN DAMAGE THE LNB.
CONNECTION TO THE TV
: Disconnect the STB from the mains before connecting or disconnecting the
cable from the satellite dish.
FAILURE TO DO SO CAN DAMAGE THE TV.
EARTHING : The LNB cable MUST BE EARTHED.
The earthing system must comply with SABS 061.
LOCATION : Place the STB indoors to avoid exposing it to lightning, rain or sun.