Filter
Top Products
Main Menu Guide
If the Screen Mode is selected as 16:9, there are two modes, Full
and Pillar-box, in the display format. If the video is formatted as 4:3
and the display format selected as Full mode, the video is expanded
to fit the 4:3 video into the 16:9 TV screen. If the video is formatted
as 4:3 and the display format selected as Pillar-box mode, the video
is displayed on the centre of the 16:9 TV screen without
modification. The right and left sides of the TV screen are blacked
out. If the video formatted as 16:9, the display format is not
applicable when the screen mode is selected as 16:9.
To configure the NTSC mode on the TV, proceed as follows:
1. Activate the A/V Output Setting via the Main menu.
2. Select the NTSC Mode item using the button.
3. Select the desired NTSC Mode using the button.
4. Press the OK ( ) or EXIT ( ) button to confirm.
The Other Setting menu supplies the following functions:
• Set the level of OSD transparency. There are two levels:
opaque 50% transparent.
• Set the duration time of the Info. Box display. The duration time
can be set from 0 to 20 seconds.
• Set the Menu Mode, which changes the menu format according to
the video format (NTSC, PAL, Auto). If the TV supports only the
NTSC format, set the menu mode to NTSC. If the TV supports
only the PAL format, set the menu mode to PAL. If the menu mode
is set at Auto, the menu format is automatically changed
according to the format of the decoded video.
NTSC Mode
Other Setting
GB28