Filter
Top Products
**
• Select Symbol Rate (ks/s) and press the OK or button to
select one Symbol Rate value from 27500/26000/22000. If your
desired value does not exist, select User Define to enter Symbol
Rate value directly using the NUMERICAL (0~9) buttons.
• Select FEC (Forward Error Correction) option and press the
OK or button to select one option among Auto, 1/2, 2/3,
3/4, 5/6, and 7/8.
• When completing entering Transponder information, select Done
and press the OK button to finish entering User Define
Transponder value.
Note:
• For channel transponder information, you can find your desired information from Satellite channel
magazine, Satellite channel related home pages, news release and home page of broadcasting
company, etc.
• If you have correctly completed setting the Transponder information, Strength bar and Quality bar
should represent as High. If the Level is close to 0, please try to reset.
3. Network Search
If your desired transponder provides the information of other transponder, you can determine whether or not to
search the channel for other transponder.
1. Select Network Search using the button, and press the
OK or button.
2. Select either Enable or Disable and press the OK button.
Select Enable to run Network Search.
**
**
**
GB 51
**
**
**
**
**
**
**
**
**
**
**
**
**
**