Filter
Top Products
**
Edit TP List
You can edit TP list to search at a time and change the setting for Transponder.
1. Select Edit TP List from Multiple Manual Search, and press the
OK or button.
2. Select Add and press the OK button to add a new
Transponder data.
3. Select a specific TP from the Transponder list, press the OK
button, select Edit, and then press the OK button to edit
Transponder data.
4. Select a specific TP from the Transponder list, press the OK
button, select Delete , and then press the OK button to
delete Transponder data. You can select multiple TPs to delete.
5. When completing configuring Transponder list, press the BACK
button to return to parent menu. Select Yes and press the
OK button to confirm to save before moving.
Note: When you select Default List and press OK , Transponder list
display.
**
8.5 Motor Antenna
If you use Motor Antenna, which is operated by motor, you should set the antenna as Motor before Channel
Search.
1. Press the MENU button.
2. Select Installation using the button, and press the OK
or button.
3. Select Antenna Setting using the button, and press the
OK or button.
4. Press the OPT+ button on the Antenna Setting screen to
switch into Motor Antenna Menu.
**
**
8. Installation
GB 56
**
**
**
**
**
**
**
**
**
**
**
**
**
**