Filter
Top Products
**
Manual Update
You can perform Manual Update only if you know which satellite has new software and the Transponder
information correctly.
1. Select Manual from Software Update Menu screen using the
button, and press the OK or button.
Select the the Satellite which provides update software. Satellite
list contains the satellites that have been set to Enable in
Installation -Antenna Setting-Satellite Alternative menu. For
unlisted satellite, start with Antenna Setting.
2. Enter Transponder Frequency in which updated software is
provided.
3. Enter Polarisation value.
4. Select Symbol Rate value. If it is not found in the List, select
User Define and enter manually.
5. Select FEC value.
Note: How to setting Satellite and Transponder for Manual Update
Sites is the same as how to edit User Define Transponder data in
Manual Search. Refer to Manual Search.
6. Select Search and Press the OK button to search software.
7. It is displayed whether or not New Software exists.
If new software does not exist, press the OK button to return
to the Manual Update Menu.
8. Select Yes and press the OK button to start updating. Select
No and press the OK button to return to the previous menu.
9. Performs Software Update. Please wait until it is completed.
10. When completing the software update, the product is
automatically powered off and on again.
**
**
GB 67
**
**
**
**
**
**
**
**
**
**
**
**
**
**