**
If using Automatic Update
You can set the product to find HUMAX software update site and update software automatically.
1. Select Automatic from Software Update Menu screen using the
button, and press the OK or button.
2. Automatically search for new software. Select Stop and press
the OK button to finish Search.
3. When detecting update software, the following result is displayed.
If new software is not found by Automatic, use Manual Update.
4. Select Yes and press the OK button to start updating. Select
No and press the OK button to return to the previous menu
without updating.
5. When completing the software update, the product is
automatically powered off and on again.
**
Note: Software Update Sites of HUMAX are listed in the following table.
Satellite Transponder data
Astra1 12669 (V) 22000 5/6
Sirius 12054 (V) 27500 3/4
Hispasat 11811 (H) 27500 3/4
Nilesat 11765 (H) 27500 3/4
Hotbird 11623 (V) 27500 3/4
**
Among the Software Update Sites of HUMAX, the software search operation is performed only for the
satellites that have been set to Enable in Installation -Antenna Setting-Satellite Alternative menu and that
have all other Antenna Setting correct.
**
**
9. Software Upgrade
GB 66
**
**
**
**
**
**
**
**
**
**
**
**
**
**