Filter
Top Products
Figure 10 displays the RVA subsystem status on the operator console.
ixfp report
AR 0015 SUBSYSTEM 1321117
AR 0015 *** DEVICE DETAIL REPORT ***
AR 0015 <---FUNC. CAPACITY (MB)---> <---CAPACITY (%)---> PHYS. COMP.
AR 0015 CUU DEF ALLOC STORED UNUSED ALLOC STORED UNUSED USED(MB) RATIO
AR 0015 80E 2838.0 N/A 369.2 2468.7 N/A 13.01 86.99 213.6 1.72
AR 0015 80F 2838.0 N/A 0.8 2837.1 N/A 0.03 99.97 0.0 9.65
AR 0015
AR 0015 *** DEVICE SUMMARY REPORT
AR 0015 CAPACITY <-----TOTAL-----> <------TOTALS %------> COMP.
AR 0015 DEFINED 5676.032 MB 100.00 RATIO
AR 0015 STORED 370.129 MB 6.52
AR 0015 PHYS.USED 213.688 MB 3.76 1.73
AR 0015 UNUSED 5305.903 MB 93.48
AR 0015
AR 0015 *** SUBSYSTEM SUMMARY REPORT ***
AR 0015 SYSTEM DEFINED-CAPACITY DISK-ARRAY-CAP FREE-DISK-ARRAY-CAP
AR 0015 PROD 726532.208 MB 117880.209 MB 57752.311 MB
AR 0015
AR 0015 NET-CAPACITY-LOAD(%) COLL.-FREE-SPACE(%) UNCOLL-FREE-SPACE(%)
AR 0015 TEST PROD OVERALL TEST PROD OVERALL TEST PROD OVERALL
AR 0015 0.00 51.01 51.01 0.00 47.55 47.55 0.00 1.44 1.44
AR 0015 1I40I READY
Figure 10. Sample Console Output of the IXFP REPORT Function
Figure 11 shows the general syntax of the IXFP command.
┌┐─,───────────────────────────────────────────────────────────────
──IXFP─ ──┬ ┬──SNAP, ──┬ ┬───
┴source ──┬ ┬─────────────────── :target ──┬ ┬──────── ──┬ ┬───────────── ──┬ ┬─────────── ────────
│ ││ │└┘──(scyl ──┬ ┬──-scyl )└┘──(tcyl)└ ┘──,VOL1=volid └┘──,NOPROMPT
│ ││ │└┘──.ncyl
│ │└ ┘──source(DSN=′ data-set-name′):target ──┬ ┬──────── ─────────────────────
│ │└┘──(tcyl)
├ ┤──DDSR ──┬ ┬──────────────────────────────── ──┬ ┬─────────── ──────────────────────────────────────
│ │││┌┐────────────────────────────── └ ┘──,NOPROMPT
│ │├┤───
┴,unit ──┬ ┬───────────────────
│ │││└┘──(dcyl ──┬ ┬──-dcyl )
│ │││└┘──.ncyl
│ │└┘──,unit(DSN=′ data-set-name′) ────
│ │┌┐─────────
└ ┘──REPORT ───
┴┬┬───── ────────────────────────────────────────────────────────────────────────────
└┘──,id
Figure 11. General Syntax of IXFP Command
See Appendix B, “IXFP Command Examples” on page 43 for an explanation of
the IXFP specifications.
20 RAMAC Virtual Array, Peer-to Peer Remote VSE/ESA