IBM SG24-5360-00 Universal Remote User Manual


 
ixfp report,80e,80f
AR 0015 SUBSYSTEM 1321117
AR 0015 *** DEVICE DETAIL REPORT ***
AR 0015 <---FUNC. CAPACITY (MB)---> <---CAPACITY (%)---> PHYS. COMP.
AR 0015 CUU DEF ALLOC STORED UNUSED ALLOC STORED UNUSED USED(MB) RATIO
AR 0015 80E 2838.0 N/A 369.2 2468.7 N/A 13.01 86.99 213.6 1.72
AR 0015 80F 2838.0 N/A 369.2 2468.7 N/A 13.01 86.99 213.6 1.72
AR 0015 1I40I READY
ixfp ddsr
AR+0015 IXFP26D TEST.DATA.1HAS EXPIRED ON CUU=80E - REPLY YESFOR
DELETION
15 yes
AR+0015 IXFP26D TEST.DATA.1HAS EXPIRED ON CUU=80F - REPLY YESFOR
DELETION
15 yes
AR 0015 1I40I READY
ixfp report,80e,80f
AR 0015 SUBSYSTEM 1321117
AR 0015 *** DEVICE DETAIL REPORT ***
AR 0015 <---FUNC. CAPACITY (MB)---> <---CAPACITY (%)---> PHYS. COMP.
AR 0015 CUU DEF ALLOC STORED UNUSED ALLOC STORED UNUSED USED(MB) RATIO
AR 0015 80E 2838.0 N/A 345.6 2492.3 N/A 12.18 87.82 212.7 1.62
AR 0015 80F 2838.0 N/A 345.6 2492.3 N/A 12.18 87.82 212.7 1.62
AR 0015 1I40I READY
Figure 31. Console Log from Releasing the Space of All Expired Files in the RVA
B.3 Report Command
In this section we present examples of using the IXFP REPORT command.
B.3.1 Syntax
┌┐─────────
──IXFP─ ── ─REPORT ──
┬┬───── ────────────────────────────────────────────────────────────────────────────────────
└┘─,id
Figure 32. Syntax of IXFP REPORT Command: Details
REPORT Provides information about the utilization of the RVA devices or, if the
id parameter has been omitted, of the whole subsystem including all
devices known (ADDed) to the VSE system.
id The id of the device or the scope of devices for which detailed
device utilization information is requested.
The id can be either a VOL1 label, a channel ID, a
channel+CU ID, or the device ID.
IXFP REPORT,80will thus provide report information for all
capable devices (non-partial-pack minidisks) in the device ID
range X′800′ through X′80Fthat have been ADDed to the
VSE/ESA system during IPL.
If we had specified the address for a non-RVA device, a report
would not be produced. If the RVA had 256 devices specified
52 RAMAC Virtual Array, Peer-to Peer Remote VSE/ESA