Icom HF/VHF/UHF ALL MODE TRANSCEIVER TV Receiver User Manual


 
7
1
PANEL DESCRIPTION
Function display
qNARROW/WIDE FILTER INDICATORS
ã” appears when selecting AM narrow or FM
narrow modes.
When installing an optional narrow filter, narrow
mode can be selected in CW, RTTY and SSB
modes.
•When the SSB wide filter is installed, “ç” appears
during wide mode selection.
w MODE INDICATORS
Show the operating mode.
ePROGRAMMABLE/1 MHz TUNING STEP
INDICATORS
➥➌a appears when the programmable tuning step
is selected.
➥➌b appears when the 1 MHz tuning step is
selected.
rSPLIT INDICATOR
Shows that the split frequency function is activated.
tFREQUENCY READOUT
Shows the operating frequency.
•“C” appears in place of the 1 Hz digit when the call chan-
nel is selected.
yDUPLEX INDICATORS
“DUP+” appears during plus duplex operation.
“DUP–” appears during minus duplex operation.
uBLANK INDICATOR
Shows that the displayed memory channel is not
programmed.
•This indicator appears both in VFO and memory modes.
iVFO/MEMORY INDICATORS
VFO A or B appears when VFO mode is selected;
MEMO appears when memory mode is selected.
oSELECT INDICATOR
Shows that the displayed memory channel is desig-
nated as a select memory channel.
!0MEMORY CHANNEL NUMBER READOUT
Shows the selected memory channel number.
!1DOT MATRIX INDICATORS
These alphanumeric readouts show a variety of
information such as current functions of the “F” keys
[F1] to [F3], memory channel names, set mode
items, etc. See p. 68 for an overview of these indi-
cators.
!2METER READOUTS
Functions as an S-meter while receiving.
Functions as a power, ALC or SWR meter while
transmitting.
Note:The SWR meter does not function in the 144
MHz band.
!3FUNCTION INDICATORS
“NB” appears when the noise blanker is activat-
ed.
“VOX” appears when the VOX function is select-
ed.
“F-BK” appears when full break-in operation is
selected and only “BK” appears when semi
break-in operation is selected.
“COM” appears when the speech compressor is
activated.
“FAGC” appears when the fast AGC function is
selected.
!4DSP INDICATORS
Appear when the optional DSP unit is installed and
activated.
N W R SPL
LSB
DSP
NB VOX F-BK COM F
S
CH
VFO A
DUP
VFO B
MEMO
AGC
ALC
SWR PO
S1
1 1.5 2 3 5
53792040
10
60dB
USB CW R
TT
Y
AMWFM TSQL
BLANK
ANF
NR
qw r
t
y
u
o
!1
!2
!3
!4
i
!0
ea
eb
M1
SPL
A/B
A=B