Icom HF/VHF/UHF ALL MODE TRANSCEIVER TV Receiver User Manual


 
19
3
FREQUENCY SETTING
Quick band change function
The quick band change function automatically stores
the last frequency and mode used for each band in a
band stacking register. This is convenient for contest
operation, etc. The tables below show the quick band
change default settings for each band.
Select S3.
•Push [DISPLAY] when M or G is displayed.
•Push [MENU] twice to select S3.
Push [F-1]–[F-3] to select a band stacking register.
•The default settings for [F-1]–[F-3] are 7, 144 and 430
MHz bands, respectively.
To change the settings for [F-1]–[F-3] from their
defaults, push [F-1]–[F-3] for 1 sec. one or more
times to until the desired band appears in the dis-
play above the corresponding switch.
•The last-used frequency and mode for the selected
band are displayed.
*General refers to the general coverage receiver (GEN in
the display) and the range varies according to version.
Mode selection
The following modes are available in the IC-
706MKIIG:
SSB (LSB/USB), CW, CW-å (CW reverse), FM,
WFM (receive only), AM, RTTY and åRTTY (RTTY
reverse).
To select the desired mode of operation push
[MODE] one or more times, then push [MODE] for 2
sec., if necessary. See the diagram at right for the
order of selection.
•The selected mode is indicated in the function display.
Note:If a desired mode cannot be selected, it may be
hidden using Initial Set mode (p. 50).
OPERATING MODE SELECTION
MODE
Push
momentarily
MODE
Push
for 2 sec.
USB LSB
CW CWå
RTTY åRTTY
FM WFM AM
BAND FREQUENCY MODE
18 MHz 18.15000 MHz USB
21 MHz 21.30000 MHz USB
24 MHz 24.95000 MHz USB
28 MHz 28.60000 MHz USB
50 MHz 50.10000 MHz USB
144 MHz 145.00000 MHz FM
BAND FREQUENCY MODE
1.9 MHz 1.91000 MHz CW
3.5 MHz 3.56000 MHz LSB
7 MHz 7.06000 MHz LSB
10 MHz 10.13000 MHz CW
14 MHz 14.10000 MHz USB
General* 15.10000 MHz USB
BLANK
CH
VFO A
S1
5379204060dB
USB
S3
7
144
430
Display shows the
default bands for the
quick band change
function.
PO 5
10
BLANK
CH
VFO A
S1
5379204060dB
USB
S3
7
GEN
144
Display shows [F-2]
has been changed from
its default of the 50 MHz
band to the general
receiver band.
PO 5
10
430 MHz 433.00000 MHz FM